80 Orville Dr. Suite 100-10131, Bohemia, NY 11716 1-631-869-4956 1-631-910-2166

Mould Test

We provide the most professional service in materials science

Home / Services / Climate Environment Reliability Test / Mould Test
Mould Test

The mould test is to detect the ability of the product to resist mould and the conditions that are beneficial to the growth of mould (that is, in a high-humidity and warm environment and in the presence of inorganic salts), whether the equipment is harmfully affected by mould . Matexcel can provide you with high-quality mould testing services.

Our test is divided into free dust and dust blowing.

Our testing samples are as follows:
Various rubbers, plastics, paints, leathers, textiles, wooden boards, functional materials, etc.

Our test strains are as follows:
Generally, there are many types of moulds, and the detection can be carried out according to the mould types specified in the standard. The mould types can also be selected according to the detection products.

• The moulds commonly used in textile mould prevention are:
Aspergillus niger, Chaetomium globosum, Penicillium cordatum, Trichoderma viride.

• Common moulds for plates and plastics are:
Aspergillus niger, Chaetomium globosum, Aspergillus flavus, Paecilomyces variotii, Penicillium ochreum, Penicillium cordatum, Gliocladium viridis, Aureobasidium pullulans.

• The moulds commonly used for rubber mould prevention are:
Aspergillus niger, Chaetomium globosum, Penicillium cordatum, Broom mould , Aureobasidium pullulans.

• Common moulds for leather mould prevention are:
Aspergillus flavus, Aspergillus niger, Mucor, Penicillium chrysogenum, Penicillium citrinum, Penicillium variegatum, Paecilomyces marcescens, Trichoderma viride.

Mould test result evaluation
After the fungus test, record the fungus growth site, coverage area, color, growth pattern, growth density and growth thickness. After the mould test, the rating are as follows:

Level 1: trace growth. mould growth and reproduction are scarce or limited. The growth range is less than 10% of the total area of the test sample, and the matrix is rarely used or damaged. Almost no chemical, physical and structural changes were found.

Level 2: slight growth. The colonies of mould s spread intermittently or loosely on the surface of the substrate, and the mould growth accounted for less than 30% of the total area, and reproduced in moderate amounts.

Level 3: medium growth. The mould grows and reproduces in a large amount, accounting for less than 70% of the total area, and the surface of the substrate shows chemical, physical and structural changes.

Level 4: serious growth. A large number of mould s grow and reproduce, accounting for more than 70% of the total area, and the substrate is decomposed or rapidly deteriorated and deteriorated.

Matexcel's mould test can identify the anti-mould ability of the test sample, assess the degree of mould growth of the test sample and the degree of influence of the mould on its performance or use. If you have any questions about this service, please feel free to contact us..

Online Inquiry
  • Verification code

Welcome! For price inquiries, please feel free to contact us through the form on the left side. We will get back to you as soon as possible.

Contact Us

80 Orville Dr. Suite 100-10131, Bohemia, NY 11716

USA: 1-631-869-4956

Fax: 1-631-910-2166

Email: info@matexcel.com

Subscribe

Enter your email here to subscribe.
Copyright © 2007 - 2020 MATEXCEL. All Rights Reserved.